Home  About us  Products  Contact us  News articles / Videos  Finishing news  Links  Blog  Site map

Abrasive media     Buffing / Polishing machines     Dry Ice Blast cleaning machines     Electro chemical Deburring machines   

Honing machines     Sand Blasting machines     Sand blasting nozzles     Shot Blasting machines      Super Finishing machines    

Thermal Deburring machines    Ultra Sonic cleaning machines     Vibratory Finishing machines     Spare parts      Used Finishing Machines   

 

News Articles / Vids

Shot blasting machines, Sand blasting machines, Vibratory finishing machines,

Dry ice blast cleaning, Thermal deburring, Sand blasting nozzles, Stainless steel media,

     
     
 

 
 

SHOT BLASTING MACHINES

 
 

http://ezinearticles.com/?Shot-Blasting-Machines&id=6545633

 
     
 

In Tumblast, a conveyor belt rotates inwards, inside the chamber of the shot blasting machine & the components are loaded on it as per the size & capacity of the machine. The door is than closed. Rotor is switched on for throwing Shots or Grits on the components. By this process, the loaded components get a universal finish. Abrasive medias such as Shots or Grits are continuously fed by the elevator of abrasive media. All the dust extracted in the process goes to the attached dust collector. On completion of desired time period, the door is opened & than the conveyor belt is driven outwards. As a result the components can be removed from the chamber. An automatic loading system can also be attached to the shot / grit blasting machine.

The Tumblast shot / grit blasting machines are available in many sizes, right from a 2 cu ft capacity machine to a 15 & 20 cu ft capacity machines. Some of the sizes are: 20" x 27", 20" x 42", 27" x 36", 30" x 43", 36" x 42", 42" x 42" as well 48" x 48".

Similarly, Hanger model Shot blasting machines are available in Single / Double door type, Centralised hanger type as well a monorail type. In this model, the components are hanged instead of loading on the conveyor belt. Rest of the process is same. The hanger rotates for a universal finish using multiple rotors depending upon requirement. The benefit is that the components do not touch each other in the process of finishing and hence are scratch free.

Swing table model shot blasting machines are suitable for bigger or heavier components or if the smaller parts are to be shot blasted only one side. Many sizes are available from a minimum 36" of table to 120" of table in sngle as well double doors.

Continuous conveyor model shot blasting machines are suitable for smaller components which are to be shot blasted only one side with a single rotor. Multiple sides can be finished by using multiple rotors. Components are fed from one side & removed from the other side duly finished.

The spare parts mostly wearable are made from ni hard or alloy steel to get the maximum life.The main spare parts include the Rotor, Blades, Spring locks, Cage & Impeller, Cage adapter, centre plate, Top segment, Side liners, Round plates as well the conveyor belt. Few precautions are necessary while running the machine.

The Tumblast model of Shot blasting machine if to be used for finishing of smaller components is best suitable and very cost effective. we can be contacted with details of your components for a suitable size & model of shot blasting machine.

More details can be viewed on http://www.finishingmachines.com

The author is engaged in the sale of Shot blasting machines for the last over 20 years. You can visit him on http://www.finishingmachines.com for more details.

Article Source: http://EzineArticles.com/?expert=B_S_Vohra
Article Source:
http://EzineArticles.com/6545633

 
     
 

Tumblast Shot Blasting Machine : ACCUROFABS

 
 

 
     
 

Sand Blasting Nozzles

 
 

 
     
 

 Shot blasting machine for clutch plates

 
 

http://www.pressbox.co.uk/detailed/Technology/Shot_blasting_machine_for_clutch_plates_1282564.html

 
     
  Pressbox (Press Release) - Guru Nanak Enterprises has introduced a Shot blasting machine in Tumblast model that can very easily be used for cleaning & finishing of Clutch plates in Aluminium. It's a Tumblast model where appx 1,000 clutch plates can be loaded & time to be given is 8 - 10 minutes. Trials if required are being done by Guru Nanak Enterprises, free of cost. Space required is around 20 ft x 10 ft with height of appx 14 ft. A suitable dust collector is attached to keep the premises clean from dust particles.  

More details can be viewed on http://www.finishingmachines.com

     
     
 

Contact mail IDs :

 
 

finishingmachines@yahoo.in 

 
     

Guru Nanak Enterprises, Vohras International,  Shot blasting machines, Sand blasting machines, Vibratory finishing machines,

 Thermal deburring machines, Thermal spraying technology Electro chemical deburring machines,  Dry ice blast cleaning, Sand blasting nozzles,

  Hanger model shot blasting machines, Paver shot blasting, Tumblast shot blasting machines, Table model Shot blasting machines, Spare parts,

 Continuous conveyor model Shot Blasting, Plastic media, Stainless steel media, Ceramic media, Mass finishing compounds, Used Finishing Machines,

 important enquiries, Denim sand blasting, Finishing news

Home  About us  Products  Contact us  News articles / Videos  Finishing news  Links  Blog  Site map

hosted by  APYL Softwares - Jodohost